[Quoting searleb]Zang,
Thanks, the website is helpful. The addition of a true parts list with recommended Mouser, Digikey, Newark, etc part numbers would also be very useful. It would make it much easier to track down parts that will fit. There was a similar parts list floating around in the original SOHA threads, but there's no guarantee that those point to point parts will fit with your boards.
Thanks, Brian
I posted this in the other thread but I may as well post it here as well. These are the parts I used for my SOHA board and they all fit perfectly. Keep in mind that I didnt go the cheapest route so if you want to save some money, there is plenty of room to do so.
www.parl.clemson.edu/~rreynol/amps/soha/...
At the bare minimum, at least it'll give you an idea of parts that do fit.
[Edited by rreynol on 09-22-2006 at 03:28 PM.]
posted 09-22-2006 03:26 PM CST (US) 
