| |||||||||||||||||||||||||||
| Moderators: cmoy | Welcome. Please log in. | ||||||||||||||||||||||||||
Registration is required to post a new topic or a reply.
| |||||||||||||||||||||||||||
| fernan Member Joined: Apr. 14, 2007 | Message [#540] posted on: 11-27-2007 06:24 AM CST (US).
Hello Zang I do not have opportunity for a comparison either Tonight I have experimented with the OPA2227,it seems that the sound is saturated before, to low volume improves the low end, anyway, encounter much more difference in the tubes, miniwatt remains ignition several seconds after retiring it, Tesla and Haltron with structure similar to the ECC81 and bulb a little wider, they are illuminated like light bulbs in the ignition, warming up plus the LM337 and with a sound a little more aggressive. greetings |
| fernan Member Joined: Apr. 14, 2007 | Message [#541] posted on: 12-01-2007 06:22 AM CST (US). I did not have much esteem by the JAN ECG 5814A (in other projects with high voltage plate) with surprise, it has given a sound me that I like. More or less this it is its lodging, usb hdd case, I will make its adaptation, components for the other side PCB (more relay circuit based ne555 or e12,of course with the blue LED) As it is your opinion, R4/14 with pins, similar to tests for R6/16, after obtaining the value for 40V, adding it for R3/13 value fixed? Greetings Attachment: C3253.JPG |
| vwhooligan Member Joined: Feb. 18, 2008 | Message [#542] posted on: 10-11-2008 11:05 PM CST (US). Greetings all! I finished my SOHA (finally!) a few nights ago. It sounds GREAT! (After I found the solder points I missed, anyway...) I tested it out with the JJ 12au7 for starters, but have recently rolled to a '62 RCA clear-top 12au7. Bottom end is nice and full. Highs sound nice and open. Now to stuff it in a case. Here's a link to my flickr site where I posted the pics. http://www.flick...57602588727334/ From that one, you can find the other 3 pics I posted. On a side note, I read somewhere about proper turn on and shut down. Sorry to sound newbish, but I unplug the cans and then shut down. Is that correct? Thanks for any clarification on this one. Zang- -Chance |
vixr![]() ![]() HeadWize Fanatic Joined: Sep. 17, 2005 | Message [#543] posted on: 10-12-2008 10:31 AM CST (US). I would have the headphones unplugged for both power up and down...connect your meter to left or right channel on the output jack set on DC mV to see why. |
| Page << < 15 16 17 18 19 20 21 22 23 24 25 26 27 28 | Prev Topic | Next Topic | ||||
![]() (remove _nospam_ ) |
© Chu Moy, 2001.